Lexus RX350 Manual page 55

When installing in the rear out-
■
board seats
Install the child restraint system in
accordance to the operation manual
enclosed with the child restraint sys-
tem.
1
Adjust the seat
If there is a gap between the child seat and
the seatback, adjust the seatback angle
until good contact is achieved.
2
Remove the head restraint if it inter-
feres with your child restraint sys-
tem. (P.137)
If the head restraint cannot be removed,
raise it to the uppermost position.
3
Widen the gap between the seat
cushion and seatback slightly.
With flexible lower attachments

4 Latch the hooks of the lower
attachments onto the LATCH
anchors.
For owners in Canada:
The symbol on a child restraint sys-
1-2. Child safety
tem indicates the presence of a
A
lower connector system.
Canada only
A
With rigid lower attachments

4
Latch the buckles onto the LATCH
anchors.
For owners in Canada:
The symbol on a child restraint sys-
55
1