Table Of Contents - IBM Power System E950 9040-MR9 Installing Instruction

Table of Contents

Table Of Contents3
Safety Notices5
World Trade Safety Information5
German Safety Information5
Laser Safety Information5
Installing A Rack-Mounted Server15
Prerequisite For Installing The Ibm Power System E950 (9040-Mr9)15
Completing Inventory For Your Server16
Attaching The Lift Handles To The Chassis16
Screws Needed For Rack Installation16
Installing The Server Into A Rack17
Installing The Lift Handles17
About This Task18
Rack With 4 Eia Rack Units (4U)18
Attaching The Slide Rails At The Front Of The Rack19
Attaching The Slide Rails At The Rear Of The Rack20
Removing Components From The System Chassis20
Rear View20
Removing The Power Supplies21
Before You Begin21
Removing The Pcie Adapters From The System Chassis22
Optional: Removing The Front Cover22
Removing The Front Cover23
Removing The System Fans23
Optional: Removing The Memory Risers24
Removing The Front Fan24
Removing The Service Access Cover25
Installing The Cable-Management Bracket26
Removing A Memory Riser26
Attaching The Cable Management Bracket To The Rack27
Installing The System Into The Rack28
Installing The Chassis Onto The Mounting Hardware28
Pulling The Blue Rail Latch29
Right System-To-Rail Locking Clip29
Installing The Clip Onto The Rail30
Replacing Components Into The System Chassis31
Releasing The Blue Latch31
Inserting A Memory Riser33
Installing The Service Access Cover34
Replacing The System Fans34
Replacing The Front Cover35
Replacing The Pcie Adapters In The System Chassis36
Replacing A Power Supply In The System36
Optional: Connecting The Sas Cables To The Server37
Plugging The Sas Cables For The Base Configuration37
Plugging The Sas Cables For The Split Configuration38
Cabling The Server And Setting Up A Console39
Determining Which Console To Use39
Plugging The Sas Cables For An Expanded Function Disk Drive Backplane39
Cabling The Server With An Ascii Terminal40
Cabling The Server To The Hmc41
Default Settings For The Diagnostic Programs41
Directly Attaching The Hmc To The Managed System42
Cabling The Server With Keyboard, Video, And Mouse43
Cabling The Server And Connecting Expansion Units43
Completing The Server Setup44
Cabling For Power Source Redundancy: Ac Feed #144
Cabling For Power Source Redundancy: Ac Feed #244
Completing The Server Setup Without Using An Hmc46
Preparing To Set Up Your Preinstalled Server47
Completing Inventory For Your Preinstalled Server48
Removing The Shipping Bracket49
Installing The System Fans52
Removing The Front Bezel53
Installing A Front Fan54
Installing The Power Supplies And Cabling The System55
Replacing The Front Bezel55
Installing A Power Supply In The System56
Plugging In The Power Cords And Securing The Cables With Fasteners57
Routing Cables Through The Cable-Management Bracket And Connecting Expansion Units61
Notices65
Accessibility Features For Ibm Power Systems Servers66
Privacy Policy Considerations67
Trademarks67
Electronic Emission Notices67
Class A Notices67
Class B Notices71
Terms And Conditions73