Opening An Acli Session - Avaya ERS 3500 Series Fundamentals

Avaya Command Line Interface fundamentals
Key combination
?
Esc+C and Exc+U
Esc+l
Esc+B
Esc+D
Esc+F

Opening an ACLI session

Use this procedure to open an ACLI session for the switch.
Before you begin
• Connect to the switch — either directly, with a console cable connected to the switch
console port, or use Telnet.
• To connect to the switch remotely, use Telnet, enable remote access, and ensure that
the switch IP address is valid.
• Use a terminal or a PC with a terminal emulator as an ACLI command station.
• If you use a console cable and console port, ensure that the terminal emulation program
conforms to settings in the following table.
Baud Rate
Data Bits
Stop Bits
Parity
Flow Control
Terminal Protocol
Procedure
1. Connect to the switch.
2. Enter the password, if applicable.
3. At ACLI Banner Screen, enter CTRL+Y.
16 Fundamentals of ERS 3500 Series
Context sensitive help
Capitalize character at cursor
Change character at cursor to lower case
Move back 1 word
Delete 1 word to the right
Move 1 word forward
Property
Comments? infodev@avaya.com
Function
Value
9600 bps
8
1
None
None
VT100 and VT100/ANSI
March 2014