3.4
Connecting VC-101M/S
3.4.1
Connecting Standalone PC
Refer to the following procedures to setup the VC-101M/S to
a standalone PC.
1.
Power on the VC-101M/S by connecting its power
source.
2.
Power LED will illuminate.
3.
Connect VDSL line from another VDSL device to VDSL
port of the VC-101M/S.
4.
SYNC LED will illuminate.
5.
Connect telephone to the POTS port.
6.
Connect Ethernet port to PC Network Interface Card
(NIC) via regular Cat. 5 cable.
RJ-11
Phone
Jack
RJ-11 Line Cord
3.4.2
Connecting Multiple PCs to an Ethernet LAN
Refer to the following procedures to setup the VC-101M/S to
an Ethernet LAN.
1.
Power on the VC-101M/S by connecting its power
source.
2.
Power LED will illuminate.
3.
Connect VDSL line from another VDSL device to VDSL
port of the VC-101M/S.
4.
SYNC LED will illuminate.
18
VDSL
POTS
10/100 Base-Tx
10/100 LNK
POWER
CN-501
RESET
SYNC
ERR
FDX/COL ACT
=
X
5V@2A
RJ-11 Line Cord
1 2 3
4 5 6
7 8 9
*
8 #
CN-501 RT
VC-101M/S
VDSL Modem
Cat. 5 Ethernet Cable
(Straight-through)
NIC Cable Connection