Related Manuals for Planet VC-231GP
Summary of Contents for Planet VC-231GP
- Page 1 1-Port 10/100/1000T 802.3at PoE + Ethernet to VDSL2 Converter VC-231GP User’s Manual...
- Page 2 PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User’s Manual. PLANET makes no commitment to update or keep current the information in this User’s Manual, and reserves the right to make improvements...
- Page 3 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision PLANET 1-Port 10/100/1000T 802.3at PoE + Ethernet to VDSL2 Converter User’s Manual For Model: VC-231GP Revision: 1.0 (September 2018)
-
Page 4: Table Of Contents
Table of Contents 1. Package Contents .............. 5 2. Product Features ............... 6 3. Hardware Introduction ............8 3.1 Front Panel and LED Indicators ........8 3.2 Rear Panel and Mode DIP Switch ........ 10 3.3 Power Information ............. 13 4. -
Page 5: Package Contents
1. Package Contents Thank you for purchasing PLANET 1-Port 10/100/1000T 802.3at PoE + Ethernet to VDSL2 Converter, VC-231GP. Open the box of the VC-231GP and carefully unpack it. The box should contain the following items: VC-231GP x1 User’s Manual x 1... -
Page 6: Product Features
„ IEEE 802.3at/af splitter devices compatible ¾ VDSL2 Features „ Cost-effective bridge function to connect two Ethernet LANs Point-to-multipoint application: Compatible with PLANET and third-party VDSL2 IP DSLAM for last-mile solution Point-to-point application: LAN to LAN extension over phone wire „... - Page 7 „ CO/CPE mode selectable via DIP switch „ Selectable target band plan (symmetric and asymmetric) and SNR margin „ Half duplex back pressure and IEEE 802.3x full duplex pause frame flow control „ Voice and data communication can be shared simultane- ously based on the existing telephone wire with distance up to 1.4km „...
-
Page 8: Hardware Introduction
RJ11 connector for VDSL2; connect to IP DSLAM or another VDSL2 equipment f LEDs for power, Ethernet, PoE and VDSL „ VC-231GP LED Indicators ¾ System Color Function Indicates that the VC-231GP has power. Green Indicates that the VC-231GP has no power. - Page 9 Blink training status (about 10 seconds). Slow Indicates that the VDSL link is at idle Blink status. Indicates the VC-231GP is running in Green CO mode. Indicates the VC-231GP is running in Green CPE mode. ¾ 10/100/1000BASE-T 802.3at PoE Port...
-
Page 10: Rear Panel And Mode Dip Switch
DC jack (DC input) for power adapter „ DC Power Jack The VC-231GP requires 54V DC, 0.74A power input, which conforms to the bundled AC-DC adapter. Should you have the issue of power connection, please contact your local sales representative. - Page 11 In some areas, installing a surge suppression device may also help to protect your VC-231GP from being damaged by unregulated surge or Note current to the VC-231GP or the power adapter. ¾ DIP Switch The VC-231GP provides 4 selective transmission modes. By...
- Page 12 When the VC-231GP in CPE mode, DIP switches 2, 3, and 4 are without function. Note ¾ DIP-2: Transmission (G. INP and Interleave mode) Method of protection against bursts from other G. INP devices or lines to impact your xDSL line.
-
Page 13: Power Information
2.1mm Width of DC Receptacle: 2.1mm +54V for DC jack DC receptacle is 2.1mm wide that matches the central post, measuring 2.1mm wide, of the VC-231GP’s DC jack. Do not install any improper unit. -
Page 14: Connecting And Using The Vdsl2 Bridge
CO device to multi CPE devices) and allows data and voice to work on the same telephone lines. „ The VC-231GP provides only one RJ11 connector for VDSL2 port to build VDSL2 connection. For voice device connec- tion, there is an additional splitter from the package of the VC-231GP, which is an ideal choice. -
Page 15: Point-To-Point Application - Lan To Lan Connection
4.1 Point-to-Point Application - LAN to LAN Connection Two sets of the VC-231G/VC-231GP could be used to link two local Area networks that are located in a different place. Through the normal telephone line, it could be set up a 150/150Mbps (G.INP, Sym, 8dB) symmetric backbone, but... - Page 16 1. [LAN1] Set the VC-231G at LAN 1 to CO mode from the DIP switch. 2. [LAN2] Set the VC-231GP at LAN 2 to CPE mode from the DIP switch. 3. Power on the VC-231G CO and VC-231GP CPE at both sides by connecting its power source.
-
Page 17: Point-To-Multipoint Application - Connect To Ip Dslam
„ On the other hand, it needs to install one or many CPE Slaves (the VC-231GP) on the individual client side and connect to the multi-port Master through the telephone lines. Multi-LAN Connection... - Page 18 1. [Remote End] Set the remote IP DSLAM/VDSL2 switch to CO mode with proper VDSL2 profile. 2. [Local End] Set the VC-231GP at the local end to CPE mode from the DIP switch. 3. Power on the VC-231GP CPEs by connecting its power source.
-
Page 19: Product Specifications
5. Product Specifications Product VC-231GP Hardware Specifications 1 10/100/1000BASE-T RJ45 auto-MDI/ LAN Port MDI-X port 1 VDSL2 RJ11 female phone jack VDSL Port Twisted-pair telephone wires (AWG24 or better) up to 1.4km Phone Port Additional splitter for POTS connection Dimensions 97 x 70 x 26 mm... - Page 20 Power Over Ethernet IEEE 802.3af Power over Ethernet PoE Standard IEEE 802.3at Power over Ethernet Plus 52V DC: 15.4 watts PoE Power Output 52V DC: 30 watts PoE Power Supply End-span Type Power Pin 1/2(+), 3/6(-) Assignment PoE Power Budget 30 watts Switch Specifications Switch Processing...
- Page 21 Capable of ADSL2/2+ standard ITU G.992.3 G.dmt.bis ADSL Compliance ITU G.992.5 G.dmt.bisplus Data Rate: Up to 24Mbps Standards Conformance IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-duplex Flow Control IEEE 802.1p Class Of Service IEEE 802.3af Power over Ethernet Standards IEEE 802.3at Power over Ethernet Plus...
- Page 22 Performance Table „ VC-231G(CO) / VC-231GP (CPE) Performance, unit: Mbps Interleave (Downstream/Upstream) Distance (meter) Asymmetric Symmetric 12dB 12dB 200m 190/90 177/83 149/141 136/129 400m 163/64 145/57 116/115 100/101 600m 110/34 92/31 72/70 58/57 800m 73/18 59/15 45/44 42/36 1000m 49/10...
-
Page 23: Troubleshooting
DIP switch or the VC-231G to the other SNR mode. 2. Please note you must use one VC-231G in CO mode and the other VC-231GP in CPE mode to make connection to each other work. „ SYMPTOM: TP LED does not light after cable is connected to the port. -
Page 24: Faqs
1.4 kilometers. Q4: What is the best data rate for the VC-231G/VC-231GP? A4: The best data rate of the VC-231G/VC-231GP is up to 190Mbps/90Mbps (downstream/upstream) in asymmetric mode and 150Mbps/150Mbps in symmetric mode over a... -
Page 25: Customer Support
8. Customer Support Thank you for purchasing PLANET products. You can browse our online FAQ resource on PLANET Website first to check if it could solve your issue. If you need more support information, please contact PLANET converter support team. -
Page 26: Appendix: Wall-Mount Installation
APPENDIX: Wall-mount Installation This part describes how to install your VC-231GP and make connections to it. Please read the following topics and perform the procedures in the order being presented. „ Wall-mount Installation Step 1: Please find the wall that can mount the VC-231GP. - Page 27 RJ11 Eth ern et ove r VD SL Co nve rte r RJ45 UTP Cable...
- Page 28 : VC-231GP * Produced by: Manufacturer‘s Name : Planet Technology Corp. Manufacturer‘s Address : 10F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan, R.O.C. is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive on 2014/30/EU.