Idle Mode - Hanna Instruments HI700 Series Instruction Manual

IDLE MODE

Idle mode is entered through setup code 2.
During idle mode the device performs the same tasks as when it is in control mode except
for the relays. The alarm relay is activated (no alarm condition), the control relays are
not activated while the analog output remains activated.
When the instrument is in idle mode the red and green status LEDs are on.
Idle mode is useful to disable control actions when the external devices are not installed
or when the user detects unusual circumstances.
Control actions are stopped as soon as the user
presses SETUP and enters the password.
In order to reactivate the control mode, use code
02 of setup (see "Setup" section). Otherwise, the
meter remains in idle mode.
25