Specifications - Hanna Instruments HI700 Series Instruction Manual

SPECIFICATIONS

8
Ranges
Resolution
Accuracy
(@20 °C/68 °F)
Typical EMC Deviation
EC Calibration
Temperature
Compensation
TDS Factor (HI710 only) Adjustable from 0.00 to 1.00
Outputs
Analog Input
Setpoint Relay
Alarm Relay
Power Supply
Power Consumption
Over Current Protection
Environment
Installation Category
Enclosure
Dimensions
Weight
* Note: actual TDS range for HI710 models depends on TDS factor set.
0.0 to 199.9 µS, 0 to 1999 µS
0.00 to 19.99 mS, 0.0 to 199.9 mS
0.0 to 100.0 ppm, 0 to 1000 ppm (HI710* only)
0.00 to 10.00 ppt, 0.0 to 100.0 ppt (HI710* only)
-10.0 to 100.0 °C
0.1 µS, 1 µS, 0.01 mS, 0.1 mS
0.1 ppm, 1 ppm (HI 710 models only)
0.01 ppm, 0.1 ppm (HI 710 models only)
0.1 °C
±0.5 % F.S. (EC and TDS)
±0.5 °C (0 to 70 °C), ±1 °C (outside)
±2 % F.S. (EC and TDS) / ±0.5 °C
Automatic or manual at 1 point
Automatic or manual, -10 to 100 °C with adjustable
temperature coefficient from 0.00 to 10.00%/ °C
Analog: isolated 0-1 mA, 0-20 mA and 4-20 mA;
0-5 Vdc, 1-5 Vdc and 0-10 Vdc; or digital: RS485
4-20 mA
2 contact outputs SPDT, 5A-250 Vac, 5A-30 Vdc
(resistive load). Fuse protected: 5A, 250V FUSE
Contact output SPDT, 5A-250 Vac, 5A-30 Vdc
(resistive load). Fuse protected: 5A, 250V FUSE
230 ±10% Vac or 115 ±10% Vac, 50/60 Hz
15 VA
400 mA 250V FAST FUSE
0 to 50 °C (32 to 122 °F); RH max 95%
II
Single case ½ DIN
Panel cutout: 140 x 140 mm
Instrument: 144 x 144 x 170 mm
Approximately 1.6 kg. (3.5 lb.)