Ricoh Pro C901s Operating Instructions Manual page 70

2. Basic Copying
• To load envelopes in the multi bypass tray (tray 7), place them with the side you want to copy face-
up. Be sure to unfold the flaps and position them opposite to the paper feed direction.
2
• When entering the horizontal size for envelopes, including the opened-out flap in the measurement.
1. Vertical size
2. Horizontal size
• You can load up to 10 envelopes (80 95 g/m
at the same time, without compressing them. Check the envelopes are not damp. Load only as much
envelopes as can be held between the paper guides on the multi bypass tray (tray 7).
• Check there is no air in the envelopes before loading.
• To get better print quality, it is recommended that you set the right, left, top, and bottom print margin,
to at least 15 mm (0.6 inch) each.
• You cannot print envelopes with the Duplex function.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten leading edges (the side going into the machine) by pressing a pencil
or ruler across them.
• Before loading envelopes, check they are rectangular in shape.
• For details about supported envelope types, see "Envelopes", About This Machine.
68
BZH059
BZK025
2
, 20 24 lb. Bond) in the multi bypass tray (tray 7)