2. Basic Copying
2
Original orientation and punch hole position
Place all the originals in the ADF in the orientation in which they can be read normally. When placing
the original on the exposure glass, keep the same orientation, but set the original facing downwards.
The relationship between the orientation in which you place the original and the punch hole positions
is as follows:
*1 The above table shows punching positioning. The orientation of the paper does not indicate direction of
delivery.
1.
Place the originals.
2.
Press [Output/ Customize Function/ Finisher].
3.
Press [Finisher].
106
BZH093
Original location
Punching
Exposure
position
ADF
glass
*1
BZH094