Auto Start; Job Preset - Ricoh Pro C901s Operating Instructions Manual

• For details about weights of paper that can be used with this function and other relevant information,
see "Supplementary Information".
• p.255 "Supplementary Information"

Auto Start

If you make settings and scan originals while the machine is busy, your copies will be made once the
machine is ready.
1. Make your settings while "Select copy mode and press the Start key." and "Scanning
originals can be started." are displayed alternately.
2. Place the original.
3. Press the [Start] key.
The machine scans the original.
Copying starts automatically once the machine is ready.

Job Preset

You can make settings for the next copy job during copying.
If a long copy job is in progress and you do not want to wait for it to finish, you can use this function to set
up the next copy job in advance. When the current copy job is finished, the next job will start automatically.
1. Press [New Job] when "Copying..." appears.
2. Be sure message "Ready" appears, and then make settings for the next copy job.
3. Place the originals, and then press the [Start] key.
All originals are scanned.
Basic Procedure
2
51