Ricoh Pro C901s Operating Instructions Manual page 260

6. Appendix
Sort
• When using the Staple functions, the capacity may be reduced.
Stack
• Paper sizes and orientations that can be used with the Shift Stack are as follows:
SRA3 , A3 , B4 , A4
11 × 15 , 11 × 14 , 10 × 15 , 10 × 14 , 8
1
8 / × 14 , 8
2
8 × 13 , 7
Staple
• The following type of paper cannot be stapled:
• Envelope
• Label paper (adhesive labels)
• Curled paper
• Paper of low stiffness
6
• You can specify how the machine responds if its memory becomes full during copying, or if the
number of copies exceeds the capacity of the stapler:
• Divides the copies into the number of sheets that can be stapled
• Cancels the stapling job
• To specify Left 2, Top 2, or Slant together with 2 Originals or 8 Originals of Combine 1 Side,
or 4 Originals or 16 Originals of Combine 2 Sides: specify
and specify
• To specify Left 2, Top 2, or Slant together with Double Copies: specify paper for
originals and specify
• Even if you place different size originals in the ADF, appropriate size of copy paper can be
automatically selected and stapled using the Mixed Sizes mode and Auto Paper Select function.
Load the paper you want to use in the paper trays beforehand. Paper sizes that can be stapled
when using the Mixed Sizes mode are as follows:
• A3
• B4 JIS
• 11 × 17
• When stapling B4 JIS , 8
plate of the finisher tray.
• You cannot change stapling positions during copying.
• When the original image is rotated, the staple orientation changes by 90 degrees.
258
, B5
1 1
/ × 11 , 5 / × 8
2 2
1 1
/ × 10 /
4 2
paper for orientation originals.
paper for
and A4
and B5 JIS
1
and 8 / × 11
2
1
/ × 14
2
, A5 , 12 × 18 , 11 × 17 ,
1
/ × 14 , 8 × 10 ,
4
1 1
/ , 8 / × 13 , 8
2 2
paper for
orientation originals.
or larger paper sizes, be sure to extend the paper support
1
/ × 13 ,
4
orientation originals
orientation