Ricoh Pro C901s Operating Instructions Manual page 117

Required finished size
A5
1
8 / × 11
2
1 1
5 / × 8 /
2 2
*1 Specify the paper size using [Custom Size] in Tray Paper Settings.
1. Press [Cut 3 Edges].
2. Press [Specify Finishing Size].
3. Select the finished size under [Regular Size].
4. To adjust the cut position, press [Cut Position Fine Adj.].
5. Press [ ] and [ ] to set the top or bottom cut position, and then press [OK].
To change the value you entered, press [ ] or [ ], or press [Clear], and then specify a new value.
6. Press [OK] twice.
• You can shift the cut position from -22.0 to 22.0 mm (-0.86 to 0.86 inch) in 0.1 mm (0.01 inch)
increments.
Book block
B5 JIS
*1
9 × 12
1 1
7 / × 10 /
4 2
Finishing
Cover
B4 JIS
*1
13 × 19.2
*1
13 × 19
*1
10.5 × 14.5
2
115