Ricoh Pro C901s Operating Instructions Manual page 189

• The relationship between the original orientation and the erased part is as follows:
1. Erased part
2. 2 99 mm (0.1 3.9 inches)
• To erase the image on the back side of the original, press [2 Sided Setting] and then [Back]. Erasing
the image on the back side is valid when you copy 2-Sided originals.
• The erase width is set to 10 mm (0.4 inch) as a default. You can change this setting under Edit in User
Tools. For details about Edit, see "Copier/Document Server Features", General Settings Guide.
Erase Border (same width)
Erases the edge margin of the original image.
BZH125
original
BZH126
Advanced Copier Functions
original
BZK065
4
187