10/100/1000Base-T Autosensing Ethernet Port Leds; 1/10Gbase-T Autosensing Ethernet Port Leds; Management Ethernet Port Leds - H3C S5830V2 Series Installation Manual

LED status
Flashing green
Steady yellow
Flashing yellow
Off

10/100/1000Base-T autosensing Ethernet port LEDs

Table 24 10/100/1000Base-T autosensing Ethernet port LED description
Status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off

1/10GBase-T autosensing Ethernet port LEDs

Table 25 1/10GBase-T autosensing Ethernet port LED description
Status
Steady green
Flashing green
Steady yellow
Flashing yellow
Off

Management Ethernet port LEDs

A management Ethernet port has one LINK LED and one ACT LED to show its link and data
transmission status.
Table 26 Management Ethernet port LED description
LED mark
LINK
ACT
Description
The port is sending or receiving data at 40 Gbps.
A transceiver module or cable has been correctly installed. The port has a link and is
operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
No transceiver module or cable has been installed or no link is present on the port.
Description
The port has a link and is operating at 1000 Mbps.
The port is sending or receiving data at 1000 Mbps.
The port has a link and is operating at 10/100 Mbps.
The port is sending or receiving data at 10/100 Mbps.
No link is present on the port.
Description
The port has a link and is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
The port has a link and is operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
No link is present on the port.
Status Description
Off The management Ethernet port is not connected.
Steady green The management Ethernet port is operating at 10/100/1000 Mbps.
Off The management Ethernet port is not receiving or sending data.
Flashing yellow The management Ethernet port is sending or receiving data.
53