S5820V2-52Q
Figure 47 Front panel
(1) 1/10GBase-T autosensing Ethernet port
(3) QSFP+ port
(5) System status LED (SYS)
Figure 48 Rear panel
1
2
9
10
8
(1) Grounding screw (auxiliary grounding point 2)
(3) Console port
(5) Fan tray slot 2
(7) Power module slot 2
(9) ACT LED for the management Ethernet port
The S5820V2-52Q switch comes with the power module slots empty and the filler modules for the
slots as accessories. You can install one or two power modules for the switch as needed. In
48, two LSVM1AC650 power modules are installed. For more information about installing and
removing a power module, see
The S5820V2-52Q switch also comes with the fan tray slots empty. You must install two fan trays of
the same model for the switch. In
information about installing and removing a fan tray, see
Figure 49 Left side panel
(1) Primary grounding point
3
4
"Installing/removing a power
Figure
(2) 1/10GBase-T autosensing Ethernet port LED
(4) QSFP+ port LED
5
(2) Management Ethernet port
(4) Fan tray slot 1
(6) Power module slot 1
(8) LINK LED for the management Ethernet port
(10) USB port
module."
48, two LSWM1HFANSC fan trays are installed. For more
"Installing/removing a fan
(2) Auxiliary grounding point 1
39
6
7
Figure
tray."