S5820V2-52Qf-U - H3C S5830V2 Series Installation Manual

S5820V2-52QF-U

Figure 44 Front panel
(1) SFP+ port
(3) QSFP+ port
(5) System status LED (SYS)
Figure 45 Rear panel
(1) Grounding screw (Auxiliary grounding point 2)
(3) Console port
(5) Fan tray slot 2
(7) Power module slot 2
(9) ACT LED for the management Ethernet port
The S5820V2-52QF-U switch comes with the power module slots empty and the filler modules for
the slots as accessories. You can install one or two power modules for the switch as needed.
In Figure 45, two LSVM1AC650 power modules are installed. For more information about installing
and removing a power module, see
The S5820V2-52QF switch also comes with the fan tray slots empty. You must install two fan trays of
the same model for the switch. In
information about installing and removing a fan tray, see
Figure 46 Left side panel
(1) Primary grounding point
(2) SFP+ port LED
(4) QSFP+ port LED
(2) Management Ethernet port
(4) Fan tray slot 1
(6) Power module slot 1
(8) LINK LED for the management Ethernet port
(10) USB port
"Installing/removing a power
Figure 45, two LSWM1FANSC fan trays are installed. For more
(2) Auxiliary grounding point 1
38
module."
"Installing/removing a fan tray."