Appendix C Ports And Leds; Ports; Console Port; Management Ethernet Port - H3C S5830V2 Series Installation Manual

Appendix C Ports and LEDs

Ports

Console port

The switch has one console port.
Table 9 Console port specifications
Item
Connector type
Compliant standard
Transmission baud rate
Services

Management Ethernet port

The switch has one management Ethernet port. You can connect this port to a PC or management
station for loading and debugging software or remote management.
Table 10 Management Ethernet port specifications
Item
Connector type
Connector quantity
Port transmission rate
Transmission medium and max
transmission distance
Functions and services

USB port

Every S5820V2-48S, S5820V2-52QF, S5820V2-52QF-U, S5820V2-52Q, or S5820V2-54QS-GE
switch has one OHC-compliant USB2.0 port that can upload and download data at a rate up to 12
Mbps. You can use this USB port to access the file system on the Flash of the switch, for example, to
upload or download application and configuration files.
NOTE:
USB devices from different vendors vary in compatibility and driver. H3C does not guarantee correct
operation of USB devices from other vendors on the switch. If a USB device does not operate
correctly on the switch, replace it with one from another vendor.
Specification
RJ-45
EIA/TIA-232
9600 bps (default) to 115200 bps
•
Provides connection to an ASCII terminal.
•
Provides connection to the serial port of a local or remote (through a pair of
modems) PC running terminal emulation program.
Specification
RJ-45
1
10/100/1000 Mbps, half/full duplex
100 m (328.08 ft) over category-5 twisted pair cable
Switch software and Boot ROM upgrade, network management
46