S5820V2-48S - H3C S5830V2 Series Installation Manual

The S5830V2-24S switch comes with the power module slots empty and the filler modules for the
slots as accessories. You can install one or two power modules for the switch as needed. In
34, two LSVM1AC650 power modules are installed. For more information about installing and
removing a power module, see
The S5830V2-24S switch also comes with the fan tray slots empty. You must install two fan trays of
the same model for the switch. In
information about installing and removing a fan tray, see
Figure 35 Left side panel
(1) Primary grounding point

S5820V2-48S

Figure 36 Front panel
(1) SFP+ port
(3) System status LED (SYS)
Figure 37 Rear panel
(1) Grounding screw (auxiliary grounding point 2)
(3) Console port
(5) Fan tray slot 2
(7) Power module slot 2
(9) ACT LED for the management Ethernet port
"Installing/removing a power
Figure 34, two LSVM1FANSC fan trays are installed. For more
(2) Auxiliary grounding point 1
(2) SFP+ port LED
(2) Management Ethernet port
(4) Fan tray slot 1
(6) Power module slot 1
(8) LINK LED for the management Ethernet port
(10) USB port
34
module."
"Installing/removing a fan
Figure
tray."