Installing your B179
Configuring the Conference Codes
About this task
The B100 Series phones needs to be configured with a number of conference codes. The main
conference code required is one to conference the phone with any held calls it has. This should
match a conference short code on the IP Office system. The default IP Office system short code is
*47.
Procedure
1. Press the Menu button
2. Scroll to CONF GUIDE and press OK.
3. Scroll to SETTINGS and press OK.
4. At the ENQUIRY prompt, enter F and press OK.
5. At the CONFERENCE prompt, enter F and the IP Office conference short code. For example
F*47. Press OK.
6. At the RETURN prompt, enter F and press OK.
Related links
Software upgrades and basic settings
Setting the PIN code
We recommend that you change the Admin PIN code from the default configuration to protect the
system settings. Make a note of the new PIN code and keep it in a safe place. The administrator's
PIN code can only be reset by a full factory reset!
Procedure
1. From the web interface, select Settings > Basic.
2. Under the "Profiles" section click the Edit button on the Admin line.
3. Enter a new PIN (must consist of eight [8] digits).
4. When you are satisfied, click Set and then Save.
Related links
Software upgrades and basic settings
July 2017
on page 20
on page 20
Installing and Administering the IP Office B179 SIP Conference Phone
Comments on this document? infodev@avaya.com
22