Branch Gateway Package Contents - Avaya G450 Manual

Before you install
Firmware
version
BGW 7.0
BGW 6.3.14
BGW 6.3.7+
BGW 6.3.6 JITC 36.x.y
BGW 6.3.5
BGW 6.3.1
BGW 6.3
BGW 6.2.1

Branch Gateway package contents

The Branch Gateway chassis and accessories are shipped in a box. The package contains the
following items:
• One Branch Gateway chassis. The required media modules are installed.
• One accessories box, containing:
- Two 19" mounting brackets
- One cable management assembly
- One Supplementary Ground Conductor
- Fifteen 3/8" flat head screws
- One 5/16" crosspoint screw for grounding
- One washer for grounding
- Four rubber feet
- One jumper for bridging NVRAM init pins
The Avaya Partner Contact Closure adjunct box, if ordered, is packaged separately.
October 2019
Build v1, v2
37.20.0 Yes
36.18.0 Yes
36.16.0+ Yes
Yes
35.x.y Yes
34.6.0 + Yes
33.13.0 Yes
32.26.0 Yes
Deploying and Upgrading Avaya G450 Branch Gateway
Comments on this document? infodev@avaya.com
v3 Recommended CM Version
Yes AA 7.0, CM 7.0
AA 6.2 FP 4, CM 6.3.6 +
Yes CM 6.3.x,AA 7.0
Yes AA 6.2 FP 4, CM 6.3.6+
Yes AA 6.2 FP 4, CM 6.3.6
AA 6.2 FP3, CM 6.3.2 & CM
5.2.1 SP 16+
Yes AA 6.2 FP3, CM 6.3.2 +
AA 6.2 FP 2, CM 6.3 & CM
5.2.1 SP 16+
Yes (min FW load AA 6.2 FP3 CM 6.3.2 + (Oct
34.6.0) 2013)
AA 6.2 FP 2, CM 6.3 & CM
5.2.1 SP 16+
No - require new AA 6.2 FP2-CM 6.3 - May 2013
FW (base not
supported)
No - require new AA 6.2 FP1-CM 6.2 sp4 - Dec
FW (base not 2012
supported)
20