Omron C200HX Operation Manual page 428

Hide thumbs Also See for C200HX:

Table of Contents

Programming Console Operations

7-2-13 Changing Timer/Counter SV

0000010101010101

=000010101010101

1=00010101010101

10=0010101010101

100=010101010101

100S=10101010101

100=010101010101

10=S010101010101

1=RS010101010101

10RS010101010101

There are two ways to change the SV of a timer or counter. It can be done either

by inputting a new value; or by incrementing or decrementing the current SV.

Either method can be used only in MONITOR or PROGRAM mode. In MON-

ITOR mode, the SV can be changed while the program is being executed. Incre-

menting and decrementing the SV is possible only when the SV has been en-

tered as a constant.

To use either method, first display the address of the timer or counter whose SV

is to be changed, presses the down key, and then press CHG. The new value

can then be input numerically and WRITE pressed to change the SV or EXT can

be pressed followed by the up and down keys to increment and decrement the

current SV. When the SV is incremented and/or decremented, CLR can be

pressed once to change the SV to the incremented or decremented value but

remaining in the display that appeared when EXT was pressed or CLR can be

pressed twice to return to the original display with the new SV.

This operation can be used to change a SV from designation as a constant to a

word address designation and visa verse.

IR bit 00115

IR bit 00100

Chapters

Table of Contents

C200hg C200he