Introduction; Robin Smartview Door Intercom - Robin SmartView Manual

1 Introduction

1.1 Robin SmartView Door Intercom

Integrated functions
The Robin SmartView door intercom (Robin SV) is the first "end-to-end" Internet Protocol (IP)
entrance door intercom unit to offer 5 fully integrated functions in one single device:
 Telephone device with a piezo push-button
 SIP support for audio and video
 High-resolution, full-colour camera with 180º fish-eye lens
Door opener

Security camera with movement detector

The Robin SV is easy to install.
A single module is all that has to be mounted; there are no individual loose boxes.
Simple operation
The Robin SV is equipped with one piezo push-button for dialling device numbers. The door opener
relay is activated via the device to which the call is directed.
The Robin SV is robustly constructed and vandal-proof.
SIP communication
The Robin SV uses the Session Initiation Protocol (SIP). This means that the entrance door unit can
be connected to any business telephone exchange (PBX) that supports the SIP protocol.
Door opener
The relay in the Robin SV is activated by typing in a key combination at the dialled device.
The device number and key combination can be specified in the software application for the Robin
SV.
The relay can be used to open a door, a gate or a barrier.
Built-in camera
A real-time video image of the person using the Robin SV at the entrance door is displayed on the
screen of the programmed device as soon as a call is answered, assuming the dialled device is
suitable for this.
gf4
Manual Robin SV ENG - v. 1.6
4