Configuration - Robin SmartView Manual

5 Configuration

5.1 Logging in to the Robin SV.
The Robin SV can be used in an 'Administrator' mode and a 'User' mode.
 The Administrator can configure all the settings in the Robin SV. To initially configure the
Robin you will need to login as an Administrator.
The User can watch 'live' video through the camera of the Robin SV and has limited control

over the camera settings.
The login credentials can be changed in the web interface of the Robin SV. The default credentials
are:
 Administrator, Login: admin, Password: 123qwe
 User, Login: user, Password: <no password necessary>
We recommend changing the default passwords after initial installation and set-up.
You can log in using the Robin Discovery Utility software.
Or, if the IP address is known, you can log in without using this
software via the address bar in the web browser.
gf13
Manual Robin SV ENG - v. 1.6
13