Robin SmartView Manual page 33

Motion detection:
 Enabled
 Sensitivity
 Object size
! Note: When the -Video-Motion- window for the Robin SV is open, no 'Events' that may have been
set can be activated, not even if Motion detection is set to 'enabled'. !
Network / Status
Network status indicates the current set or assigned network information.
Network status:
 Interface
 MAC address
 IP address
 IP netmask
 Default gateway
 Primary nameserver
 Secondary nameserver
gf32
Activates Motion detection.
Increases/reduces detection sensitivity.
Changes the size of the object to which the Robin SV
must react.
Shows the network interface that is used.
Indicates the Robin SV's MAC address.
Indicates the Robin SV's IP address.
Shows the standard IP netmask.
Indicates the IP address for the standard gateway.
Indicates the IP address for the primary DNS.
Indicates the IP address for the secondary DNS.
Manual Robin SV ENG - v. 1.6
32