Robin SmartView Manual page 38

Network / NAT
Depending on the network configuration, you may need to set NAT data in the Robin SV.
Settings:
 NAT hostname
 NAT port
 Use STUN for NAT
address discovery
 Stun server
 Stun port
 Stun status
gf37
Enter the NAT address or the hostname.
Enter the IP port for NAT.
Activate this option if a STUN server is used.
Enter the IP address or hostname for the STUN
server here.
The IP port used by the STUN server for
communication.
Indicates the status of the STUN server.
Manual Robin SV ENG - v. 1.6
37