Table of Contents
Advertisement
Windows users:
Copy the Robin Discovery Utility software to a PC that is connected to the network.
Start the Robin Discovery Utility software (double-click the icon below). Click the "Scan"
button at the bottom left. The software will scan for Robin devices in the network. When the
Robin SV is detected, it is displayed in the list. Double-click on the Robin SV you want to
configure; the 'Web-GUI' for the selected Robin SV is displayed now.
Apple Macintosh users:
To detect and access the Robin SV on a Mac, you simply use the machine's standard internet
browser, 'Safari'.
In the 'bookmark overview' of Safari (option-command-B), you will see the 'Bonjour' section in
the left-hand column.
Click here to display all the devices detected in your LAN network on the right-hand side of your
window, including the Robin SV. Double-click on the Robin SV you want to configure; the 'Web-
GUI' for the selected Robin SV is displayed now.
Linux users:
Enter the IP address for the Robin SV in the address bar in the web browser that is installed on
your PC in order to activate the 'Web GUI'.
The Robin SV can now be configured further via the 'Web GUI'
(see Chapter 4, Configuration).
gf12
Manual Robin SV ENG - v. 1.6
12
Advertisement
Table of Contents
