System Installation; Requirements Prior To Installation - Robin SmartView Manual

4 System installation

4.1 Requirements prior to installation

Network connection with PoE (Power over Ethernet is used to power the door intercom; the

power supply must be 802.3af compatible).
 PC with web browser.
 The following web browsers are supported:
- FireFox
- Safari
- Google Chrome
USB stick with the 'Robin Discovery Utility' software (supplied)

Network with or without DHCP support

(DHCP support is recommended)

Network cable, the cable may not be longer than 100 metres

Optional - Two-core cable for door switch operation
4.2 Connecting the Robin SV to a network and installing the Robin Discovery Utility software.
 Connect the Robin SV to the network via the network connection socket on the rear.
 The Robin SV will now boot. This can take up to 60 seconds.
! Note: The length of the Ethernet cable may not exceed 100 metres. This is a limit of the Ethernet
standard. !
! Note: Internet Explorer can be used for the base configuration of the Robin SV, but can't be used
for the video related settings. This is because Internet Explorer doesn't support 'Motion JPEG'. !
gf11
Manual Robin SV ENG - v. 1.6
11