USSC 6041 How To Use And Maintain page 25

You will now have an opportunity to make adjustments on an actual USSC 6041 Multi-Fuel Stove in order to
maintain a consistent heat. The instructor will use the following checklist to ensure you are able to perform each
step while maintaining consistent heat with the USSC 6041 Multi-Fuel Stove.
Skills
Maintain consistent
heat
Reload pellet hopper
Is pellet hopper full
Set pellet feed rate
Adjust agitator speed
Adjust draft fan and
damper
Flame good and pellets
burning consistently
Is airflow constricted
Turn off stove and
clean
Lesson Three – Hands-On Practical Exercise
Given a lit USSC 6041 Multi-Fuel Stove adjust pellet feed rate, agitator
speed, draft fan, and damper to maintain a consistent heat
degree Fahrenheit tolerance.
Given a USSC 6041 Multi-Fuel Stove and pellets load the pellet hopper
to a level which will allow the lid to close in the stove auger safety switch
to not engage.
Given a USSC 6041 Multi-Fuel Stove, validate that the pellet hopper is
full. Check hopper twice a day to ensure their enough pellets in the last
until next check.
Given a lit USSC 6041 Multi-Fuel Stove and a desired consistent heat
range adjust pellet feed rate to maintain burn of pellets to produce a good
flame with less than 5% unburned pellets.
Given a lit USSC 6041 Multi-Fuel Stove and a desired consistent heat
range adjust agitator speed in conjunction with pellet feed rate to
maintain less than 5% unburned pellets.
Given a lit USSC 6041 Multi-Fuel Stove and desired consistent heat
range, adjust draft fan and damper to maintain a good flame that is
shallow steady and solid without flickering.
Given a lit USSC 6041 Multi-Fuel Stove after pellet feed rate, agitator
speed, draft fan, and damper have been adjusted determine if flame is
burning good or poorly 90% of the time.
Given a lit USSC 6041 Multi-Fuel Stove with a poorly burning flame,
determine if the airflow is constricted 90% time.
Given a lit USSC 6041 Multi-Fuel Stove with a poorly burning flame and
a constricted airflow properly turn off the stove safely 100% time.
Performance Objectives Standard
Met?
Y / N
within a 3
Y / N
Y / N
Y / N
Y / N
Y / N
Y / N
Y / N
Y / N
25