USSC 6041 How To Use And Maintain page 13

You will now have an opportunity to work on an actual USSC 6041 Multi-Fuel Stove and clean it under the guidance of
the instructor. The instructor will use the following checklist to ensure you are able to perform each step while cleaning
the USSC 6041 Multi-Fuel Stove.
Skills
Clean stove
Assemble all cleaning
gear
Clean burn chamber
Remove ash pan and
vermiculite
Clean excess ash off
walls and out the side
air vents
Vacuum burn chamber
and rear vent chamber
Clean ash pan and
vermiculite
Replace ash pan and
vermiculite
Clean exhaust pipe
Remove terminator cap
and cleanout cover
Brush out exhaust pipe
Replace terminator cap
and cleanout cover
–
Lesson One Hands-On Practical Exercise
Given USSC 6041 Multi-Fuel Stove, clean stove leaving it free of fly ash
and all air vents permit air to move through freely.
Given a USSC 6041 Multi-Fuel Stove, in need of cleaning, and a job aid,
assemble all cleaning gear. Assemble all cleaning items listed in the job
aid.
Given USSC 6041 Multi-Fuel Stove and proper cleaning gear, clean the
burn chamber by removing all fly ash, ash, and hardened ash until it is all
removed and the air vents are clean.
When preparing to clean a USSC 6041 Multi-Fuel Stove burn chamber,
remove ash pan and vermiculite. Remove items per instruction manual in
proper order so vermiculite does not break.
Given a paintbrush, brush access fly ash off burn chamber walls and out
of side air vents, until all fly ash is removed.
Given an Ash-Vac, vacuum all ash out of burn chamber and vent
chamber, until all ash is removed.
Given a paintbrush, brush all fly ash off of vermiculite until all loose ash is
removed.
Given a bucket containing warm water, soak and then clean hardened
ash off ash pan, until hardened ash is all removed.
Upon completion of cleaning burn chamber, vents, ash pan, and
vermiculite, replace ash pan and vermiculite in proper order so
vermiculite does not break.
Given USSC 6041 Multi-Fuel Stove and proper cleaning gear, clean the
exhaust pipe by removing all fly ash and creosote.
When preparing to clean a USSC 6041 Multi-Fuel Stove exhaust pipe,
remove terminator cap and cleanout cover without damaging exhaust
pipe.
Given a 3.5" chimney brush, brush out exhaust pipe until no further fly
ash and creosote is present.
Upon completion of cleaning out exhaust pipe, replace remove terminator
cap and cleanout cover without damaging exhaust pipe.
Performance Objectives Standard
Met?
Y / N
Y / N
Y / N
Y / N
Y / N
Y / N
Y / N
Y / N
Y / N
Y / N
Y / N
Y / N
13