4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the Copyboard Glass Models with copyboard
Before Removing the Copyboard Glass
Models with copyboard
1) Remove the copyboard cover. (Refer to page 4-64)
2) Remove the control panel unit. (models without FAX) (Refer to page 4-79)
Removing the Copyboard Glass
Models with copyboard
Caution:
Place the detached copyboard glass cover on a cloth etc. to avoid damaging the bottom
sheet.
When removing the copyboard glass, take care not to touch the glass surface.
If the surface becomes dirty, clean it with lens-cleaning paper.
4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the Copyboard Glass Models with copyboard
1) Press the unlock button [1] and open the reader unit [2].
2) Remove the 2 screws [1] and close the reader unit [2].
F-4-142
[2]
[2]
x2
[1]
F-4-144
4-66
[1]
F-4-143
[1]
4-66