Add Device Manually
View Event Log
Properties
SIEMENS AG
If the Serial Modem is connected behind a router, it is not
located automatically but must then be added manually ("Add
Device manually"). This is done by entering its IP address in
the required space. If the device can be accessed at this
address, it is imported into the list.
Note: If the device is installed behind a router, the IP address
cannot be changed. This prevents the device from becoming
unaccessible by mistake.
View current log-file (internal trace)
Type-specific configuration user surface
For more information, see the relevant chapters in this
manual.
Page 41 of 79
Manual 7XV5655-0BB00
C53000-G1176-C175-3