Siemens 7XV5655-0BB00 Manual page 10

Modem for transmission of serial data or protocols from devices with an rs232, rs485 or fo interface via ethernet

Hide thumbs Also See for 7XV5655-0BB00:

Table of Contents

Manual 7XV5655-0BB00

Features

Protocol detection for VDEW / IEC60870-5-101/103 and DIGSI® protocol (similar

to IEC60870-5-103), UDP protocol without error detection and correction

RS232/RS485 (switchable port) or FO interface for data transfer and modem

configuration.

Serial baudrate and data format to the terminals can be set from 2400 Bd to

115.2 kBd with data formats 8N1, 8N2, 8E1.

Reset to default values (factory settings) with INIT button: 9600 baud, 8N1

A 10-Mbit Ethernet interface (10BaseT) for the 10/100 Mbit network.

DIP switch for RS232/RS485 selection and RS485 bus termination as well as

FO idle state

Enhanced security possible by password protection and IP address selection.

LED displays for operating voltage and data traffic are located on the front panel

DIN rail module in the plastic housing with integrated wide-range power supply

unit (24 - 250 V DC and 60 - 230 V AC) which provides connection to all

conventional substation batteries or AC power systems.

Protective conductor (PE) connection

Easy configuration with the configuration tool

Configuration tool V15 for

C53000-G1176-C175-3

Microsoft Windows

Page 10 of 79

XP Prof. 32-Bit SP3

7 Prof. 32-Bit SP1

7 Prof. 64-Bit SP1

Server 2008 R2 / 64-Bit

SIEMENS AG

Table of Contents