Siemens 7XV5655-0BB00 Manual page 38

Manual 7XV5655-0BB00
in local Net
Password
Logged in
CPU-ID
General Settings
When the Serial Modem is delivered, no valid IP address has been set yet.
The default address is 10.10.5.1.
A unique IP address must first be assigned to each device.
To set the IP address in the Serial Modem, the device must be connected in the same
network segment. Otherwise, the device should be connected to the operating PC using
a "cross-over" patch cable.
If the Serial Modem is integrated into a DHCP network, i.e. the available IP addresses
are assigned automatically, the network administrator on the DHCP server must assign
a fixed IP address for the Serial Modem.
Right-clicking the device entry in the overview window displays a dialog box in which
further actions can be performed.
C53000-G1176-C175-3
If this entry is "NO", the device is not in the local network
segment.
If the device is installed behind a router, the IP address
cannot be changed. This prevents the device from being
accessed unintentionally.
If this entry is "YES", the device is password-protected and
the password must be entered before configuration (by
right-clicking on "login").
If the password is forgotten, the device must be
submitted again (see last page).
If this entry is "NO", the password has to be entered before
configuration (by right-clicking "login").
Internal device ID (not relevant for users)
Page 38 of 79
SIEMENS AG