Furuno TZT12F Installation Manual page 48

3. HOW TO SET UP THE EQUIPMENT
Menu item
[Manual Fuel Manage-
ment]
Menu item
[Add Default CZone
Pages]
[CZone DIP Switch
Settings]
Menu item
[Reset Instrument Pag-
es]
[Reset Default Set-
tings]
[Initial Setup] menu - [Engine & Tank Automatic Setup]
The TZT12F will automatically detect engines and tanks connected to the same net-
work.This is the recommended method for setting up engines and tanks.
[Initial Setup] menu - [Engine & Tank Manual Setup]
The manual set up method should only be used if the automatic setup did not correctly
detect your engines or tanks.
Menu Item
[Nickname]
[Used For Propulsion]
[Reset]
3-12
Description
Set to [ON] for manual fuel manage-
ment. See the Operator's Manual.
CZone
Create, edit CZone pages.
Set this unit's DIP switches. For the serviceman. Do not change the set-
tings.
Resets all instrument pages to default.
Resets applicable settings to default.
Description
Change the nickname for the engine or tank.
Select which engine/tank is used to
calculate the distance which may be
traveled using the remaining fuel. [ON] uses
the engine/tank for calculations, [OFF]
ignores the engine/tank.
Resets the engine/tank details to default.
Options (setting range)
[OFF], [ON].
Description
Description
[OK], [Cancel]
[OK], [Cancel]
Options (setting range)
[ON], [OFF]