2. WIRING
nector does not require the 12-10P conversion cable. Connect its transducer cable
directly to the multi function display.
2.10
Example TZT12F System Configurations
Small vessels (internal GPS, internal fish finder, DRS4DL, DRS4DL+)
The example below shows a typical configuration for small vessels.
Radar Sensor
DRS4DL+, DRS4D-NXT
12 to 24 VDC
Note 1: Matching Box MB-1100 (optional supply) is required for some FURUNO trans-
ducers. See the INTERCONNECTION DIAGRAM at the back of this manual.
Note 2: The 12-10P conversion cable (FRU-CCB12-MJ-01, 0.4m, supplied) is re-
quired for some transducers.
2-10
12 to 24 VDC
300W/600W/1kW
Transducer (Selectable)
Multi Function Display
TZT12F
DI-FFAMP
2/3kW