Furuno TZT12F Installation Manual page 18

1. MOUNTING
Decide the most suitable site from the locations selected with the following proce-
dures.
1. Connect the power cable and transducer cable to the display unit.
2. Put the transducer into a water-filled plastic bag.
Press the transducer against the chosen site.
3. Tap
4. After the startup procedure completes (approx. 90
seconds), the last used display appears. Tap the
[Home] icon (
screen and display mode settings. See section 3.3
for how to use the menu.
5. Scroll the menu to show [Fish Finder] in the menu, then tap [Fish Finder].
6. Scroll the [Fish Finder] menu to show the [FISH FINDER INITIAL SETUP] menu,
then tap [Fish Finder Source].
7. Confirm the available fish finder from the list of available sounders, then tap the
appropriate fish finder. For the purpose of this example, the default setting
[TZT12F] (internal sounder) is selected as the source.
8. Tap the [<] icon to return to the [Fish Finder] menu.
9. Scroll the [Fish Finder] menu to show the [FISH FINDER INITIAL SETUP] menu,
then tap [Transducer Setup].
10. Tap [Transducer Setup Type].
11. Tap [Model].
12. Tap the [<] icon to return to [Transducer Setup] menu.
13. Tap [Model Number], scroll the menu to show your transducer model, then tap the
transducer model number.
14. Tap the [<] icon twice to return to the [Fish Finder] menu, then scroll the [Fish Find-
er] to show the [FISH FINDER INITIAL SETUP] menu.
15. At the [Transmission Power] menu item, set the transmission power to a level of
[Max].
16. Scroll the menu to show [Fish Finder Transmit], then tap [Fish Finder Transmit].
Check if the bottom echo appears on the right side of the screen, in the display
area.
If no bottom echo appears, repeat the procedure until a suitable location is found.
17. Turn off the power of control unit and remove the transducer from the plastic bag
and wipe the face of transducer with a cloth to remove water and any foreign ma-
terial.
1-10
(power switch) to turn the power on.
) to show the home
Home
Plastic bag
Water
Hull plate