Comtech EF Data Memotec NetPerformer SDM-8400 Hardware Installation Manual page 63

3.Memotec will be responsible for both material and labor required to effect all
4.During the Standard Warranty Period, the Distributor/Business Partner or end-
5.The warranty does not apply if:
6.The warranty does not cover replacement or repair necessitated by loss or dam-
7.The warranty does not cover damage or loss incurred in any transportation of
8.The warranty does not cover any labor involved in the removal and or reinstalla-
9.The warranty excludes any responsibility by Memotec for incidental or conse-
10.It is the Distributor/Business Partner's (or direct purchasers) responsibility to
Memotec Inc.
from Distributor/Business Partner.
repairs under terms of the warranty for the Standard Warranty Period (see
section below for Standard Warranty Period for specific Memotec product
lines), providing the Product is returned to Memotec as specified above.
user may return defective parts for replacement at no charge (except shipping
to Memotec), in lieu of returning the complete Product.
a)Any part of a product that has been installed, altered, repaired, or mis-
used in any way that, in the opinion of Memotec, would affect the reli-
ability or detracts from the performance of any part of the product, or is
damaged as the result of use in a way or with equipment that had not
been previously approved by Memotec;
b)The warranty seal has been broken or the Product has been opened
without obtaining prior authorization in writing from Memotec. This
excludes Product option upgrades as long as Memotec documented
procedures for option upgrades are strictly adhered to;
c)The Product has had the serial number altered, defaced or removed; or
d)The Product has been damaged by accessories, peripherals, and/or
other attachments not approved by Memotec.
age from any cause beyond the control of Memotec, such as lightning (power
surge or brown out) or other natural and weather related events, outbreak of
hostilities or wartime environments.
the product.
tion of warranted equipment or parts on site, or any labor required to diagnose
the nature of the problem and establish the necessity for repair or replacement
of the Product.
quential damages arising from the use of the Product, or for any inability to
use them either separate from or in combination with any other equipment or
products.
ensure all paperwork complies with customs requirements.
A-3