NetPerformer SDM-8400 Hardware Installation Guide
4-4
State
Blinking Red/Amber/
Early stage of system startup, when the bootstrap
Green
program is executing a hardware self-test.
Red
A software reset has occurred.
Amber
A Write operation to Flash memory is in progress, e.g.
while saving the application after a download.
Green
Hardware initialization is in progress.
Off
No alarm has occurred on the unit since the alarms
were last cleared.
a.
To turn the
at the console command line. Refer to the NetPerformer User Guide.
Interpretation
Table 4-3: AL LED states
AL
CE
LED off, enter the
(Clear ERR/DIAG LED) command
a
Memotec