Debug Software - Intel IQ80315 Board Manual

®
Intel IQ80315 I/O Processor Evaluation Platform
4.4

Debug Software

Several software debug solutions are available for the IQ80315 CRB. Among them are:
•
code|lab* Debug software: Allows the downloading and debugging of applications through the
JTAG interface. The FLASH memory of the IQ80315 CRB can also be programmed through
code|lab.
•
GDB–GNU* Debugger: Allows the download and debug of application through the serial link
or through Ethernet Port0.
•
OCD Commander*: A simple, free JTAG debugging tool that allows download and debug of
applications through the JTAG interface.
When compiling an application for debug on the IQ80315 CRB, the RedHat* GNUPro* tools
available on the Intel Developer website (http://developer.intel.com) can be used to compile,
assemble, and link an application. The linker specifications file "redboot.specs" can be used with
the GNUPro toolchain to link the application to the correct location in SDRAM. The application
can be downloaded through serial, Ethernet, or JTAG into the IQ80315 SDRAM. The debug
software listed above can assist in debugging the application.
50
®
Intel IQ80315 I/O Processor Evaluation Platform Board Manual