Connectors; Rear Gasket; Dual 10/100/1000 Base-T Rj45 Ethernet Connector; Atx Rear Gasket Dimensions - Intel IQ80315 Board Manual

I/o processor evaluation platform

Table of Contents

2.11

Connectors

Connectors, switches, and headers are mounted on the PCB for Rear Gasket I/O, internal use, and

front panel I/O. This section describes the parts selected and the pinout for these components. See

Figure 2, "Intel

approximate layout of these components.

2.11.1

Most of the I/O connectors requiring user access are located in the rear gasket area. The IQ80315

CRB rear gasket area conforms to the standard ATX rear gasket dimensions and location.

shows the standard ATX rear gasket dimensions and

gasket components are arranged.

Figure 5.

Figure 6.

2.11.2

The RJ45 Ethernet connectors are dual 1GbE RJ45 jacks. These connectors have built-in magnetics

and a green and amber/green LED for each port. The pinout follows standard Ethernet connector

pinout.

Intel

IQ80315 I/O Processor Evaluation Platform Board Manual

IQ80315 Customer Reference Board Layout Diagram" on page 13

R 0.039 MAX

Intel

IQ80315 I/O Processor Evaluation Platform

Figure 6

shows how the IQ80315 CRB rear

0.100 MIN KEEPOUT AROUND OPENING

Gasket

for the

Figure 5

Table of Contents