2-2 Connectors; 2-2.1 Panel Connector - Intel BX User Manual

II.HARDWARE INSTALLATION

2-2 Connectors

2-2.1 Panel Connector

- PWR LED ATX Power LED Connector (3 pins)
- KBLCK Keyboard Lock Switch Connector (2 pins)
- SLP Suspend Switch Connector (2 pins)
- SPEAKER Chassis Speaker Connector (4 pins)
- GRN LED Green Status LED Connector (3 pins)
- HDD LED HDD LED Connector (4 pins)
- RESET Reset Switch Connector (2 pins)
- * PWR ON ATX Power Switch Connector and Suspend Switch
Connector (2 pins)
* PWR ON: ATX Power Switch and Suspend Switch Connector
Attach the ATX power button or suspend switch cable to this connector.
In the ATX power system, this connector will be not only an ATX power button,
but a suspend switch as well. Details are describes as below:
When the system is off, push the power button to turn the system on. When
the system is on, push the power button rapidly within 4 seconds to switch the
system to the suspend mode, and, by pushing and holding the button for more
than 4 seconds, it will turn the system completely off. When the system is in
the suspend mode, push the power button rapidly to turn the system on.
2-3