Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
Media and Additional Parts
Description
Operator's Manual
Engine owner's manual
Operator training materials
Ignition keys
Description
No parts required
Carriage bolt (5/16 x 3/4 inch)
Nut (5/16 inch)
Bolt (1/2 x 1-3/4 inches)
Bolt (1/2 x 1-1/2 inches)
Nut (1/2 inch)
Cutting unit (obtain from your authorized
Toro distributor)
Grass basket
No parts required
Rear Weight Kit (Part No.
100-6441)—purchase separately
19.5 kg (43 lb) of calcium chloride
(purchase separately)
No parts required
Qty.
–
2
2
2
6
8
3
3
–
1
1
–
Qty.
1
Review it before operating the machine.
1
Use it to reference engine information.
1
Read/view the materials before operating the machine.
2
Start the engine.
8
Use
Activate and charge the battery.
Install the battery.
Install the roll bar.
Install the cutting units.
Mark the outer grass baskets.
Add the rear ballast and weight kit.
Reduce the tire pressure.
Use