Table of Contents
Advertisement
The safety-interlock system prevents the engine from
starting unless:
•
The traction pedal is in the N
•
The functional-control lever is in the N
position.
The safety-interlock system prevents the machine
from moving unless:
•
The parking brake is disengaged.
•
You are seated in the operator's seat.
•
The functional-control lever is in the M
or the T
RANSPORT
The safety-interlock system prevents the reels from
operating unless the functional-control lever is in the
M
position.
OW
Checking the Traction Pedal
Perform the following system checks daily to ensure
that the interlock system is operating correctly:
1.
Sit on the seat, move the traction pedal to the
N
position, move the functional-control
EUTRAL
lever to the N
EUTRAL
parking brake.
2.
Try to move the traction pedal forward or
backward.
The pedal should not move, which indicates
that the interlock system is operating correctly.
Correct the problem if it is not operating properly.
Checking the Function Control
1.
Sit on the seat, move the traction pedal to the
N
position, move the functional-control
EUTRAL
lever to the N
EUTRAL
parking brake.
2.
Move the functional-control lever to the M
position or the T
start the engine.
The engine should not turnover or start, which
indicates that the interlock system is operating
correctly. Correct the problem if it is not
operating properly.
3.
Sit on the seat, move the traction pedal to the
N
position, move the functional-control
EUTRAL
lever to the N
EUTRAL
parking brake.
4.
Start the engine and move the functional-control
lever to the M
OW
position.
The engine should shut off, which indicates that
the interlock system is operating correctly.
position.
EUTRAL
EUTRAL
OW
position.
position, and engage the
position, and engage the
position and try to
RANSPORT
position, and engage the
position or the T
RANSPORT
Correct the problem if it is not operating properly.
Checking the Operator's Presence
Switch
1.
Sit on the seat, move the traction pedal to the
N
EUTRAL
lever to the N
parking brake.
2.
Start the engine.
3.
Release the parking brake, move the functional
position
control lever to the M
the seat.
The engine should shut off, which indicates
that the interlock system is operating correctly.
Correct the problem if it is not operating properly.
Checking the Raise/Lower Mow
Control
1.
Sit on the seat, move the traction pedal to the
N
EUTRAL
lever to the N
parking brake.
2.
Start the engine.
3.
Move the raise/lower mow control forward to
lower the cutting units. The cutting units should
lower but not start rotating.
If they start rotating, the interlock system is not
operating correctly; correct the problem before
operating the machine.
Driving the Machine without
Mowing
•
Ensure that the cutting units are fully raised.
OW
•
Move the functional-control lever to the T
position.
•
Use the brakes to slow the machine while going
down steep hills to avoid loss of control.
•
Always approach rough areas at a reduced speed
and cross severe undulations carefully.
•
Familiarize yourself with the width of the machine.
Do not attempt to pass between objects that are
close together to prevent costly damage and
downtime.
21
position, move the functional control
position, and engage the
EUTRAL
position, and rise from
OW
position, move the functional control
position, and engage the
EUTRAL
RANSPORT
Advertisement
Table of Contents
