Run Status (Chiller); Lead / Lag Compressor Selection; Or 4 Compressor Chiller Configuration - York eco YCAS Series Manual

Micro Panel Contents
If any inductive load devices (relay or
contactor) supplied by the user are in
the electrical circuit connected to the
dry alarm contacts, the device must be
suppressed at the load with a RC sup-
pressor YORK Part Number 031-
00808-000 across the inductive coil.
(Typically, several are supplied loose
with the panel). Failure to install sup-
pressors will result in nuisance faults
and possible damage to the chiller.
If the alarm circuit is applied in an ap-
plication used for critical duty (such
as process duty or cooling other criti-
cal equipment) and the alarm circuit
should fail to function, YORK will not
be liable for damages.
1.20

RUN STATUS (CHILLER)

1.21

LEAD / LAG COMPRESSOR SELECTION

182
1.22 3 OR 4 COMPRESSOR
CHILLER CONFIGURATION