Table of Contents
Advertisement
Figure 19 Installing the slide rails
Mount the switch in the rack:
4.
a. Verify that the front mounting brackets and chassis rails have been securely attached to the
switch chassis.
b. Verify that the slide rails have been correctly attached to the rear rack posts.
c. Install cage nuts (user-supplied) to the front rack posts and make sure they are at the same
level as the slide rails.
d. Supporting the bottom of the switch, align the chassis rails with the slide rails on the rack
posts, as shown in
slide rails until the mounting brackets are flush with the rack posts.
e. Use M6 screws (user-supplied) to attach the mounting brackets to the rack, as shown
in
Figure
21.
To secure the switch in the rack, make sure the front ends of the slide rails reach out of the
chassis rails.
Figure
20. Work with another person to slide the chassis rails along the
15
Advertisement
Table of Contents
