Table of Contents
Advertisement
Mount the switch chassis in the rack:
4.
a. Install cage nuts (user-supplied) in the mounting holes in the front rack posts. Make sure the
corresponding cage nuts on the front and rear rack posts are at the same height.
b. One person supports the chassis bottom with one hand, holds the front part of the chassis
with the other hand, and pushes the chassis into the rack gently.
Make sure the shoulder screws closely contact with the upper edges of the rear mounting
brackets, as shown in
c. The other person uses M6 screws (user-supplied) to attach the front mounting brackets to
the front rack posts. Make sure the switch is installed securely in the rack.
Figure 16 Mounting the switch in the rack (with the wide flange of the mounting brackets
inside the rack)
Figure 17 Mounting the switch in the rack (with the wide flange of the mounting brackets
outside the rack)
Figure 16
and
Figure
13
17.
Advertisement
Table of Contents
