S5130-54C-Pwr-Hi - H3C S5130-HI Series Installation Manual

S5130-54C-PWR-HI

Figure 74 S5130-54C-PWR-HI front panel
(1) 10/100/1000BASE-T autosensing Ethernet port
(3) Management Ethernet port
(5) Mini USB console port
(7) USB port
(9) SFP+ port
(11) Expansion card status LED (SLOT)
(13) Power module 1 status LED (PWR1)
(15) Management Ethernet port LED
Figure 75 S5130-54C-PWR-HI rear panel
1
(1) Grounding screw
(3) Fan tray slot 1
(5) Power module slot 1
The S5130-54C-PWR-HI switch comes with power module slot 1 empty and power module slot 2
installed with a filler panel. You can install one or two power modules for the switch as required. In
this figure, two PSR720-56A AC power modules are installed in the power module slots. For more
information about installing and removing a power module, see
module."
The S5130-54C-PWR-HI switch comes with the two fan tray slots empty. You must install two fan
trays of the same model for the switch. In this figure, two LSPM1FANSA fan trays are installed in the
fan tray slots. For more information about installing and removing a fan tray, see
a fan tray."
The S5130-54C-PWR-HI switch comes with a filler panel in the expansion card slot. You can select
an expansion card for the switch as required. In this figure, an LSWM2SP2PM interface card is
installed in the expansion card slot. For more information about installing and removing an
expansion card, see
2 3
"Installing/removing an expansion
(2) 10/100/1000BASE-T autosensing Ethernet port
LED
(4) Console port
(6) Port LED mode switching button (MODE)
(8) System status LED (SYS)
(10) Port mode LED
(12) Power module 2 status LED (PWR2)
(14) SFP+ port LED
4
(2) Expansion card slot
(4) Fan tray slot 2
(6) Power module slot 2
card."
58
5 6
"Installing/removing a power
"Installing/removing