Table of Contents
Advertisement
Mount the chassis in the rack:
4.
a. Install cage nuts (user-supplied) in the mounting holes in the front rack posts. Make sure the
corresponding cage nuts on the left and right front rack posts are at the same height.
b. One person holds the switch chassis and aligns the installation holes on the mounting
brackets with the cage nuts on the rack posts.
c. The other person uses M6 screws (user supplied) to attach the mounting brackets to the
rack.
Figure 10 Mounting the switch in the rack (front mounting brackets at the port side)
Figure 11 Mounting the switch in the rack (front mounting brackets at the power module
side)
10
Advertisement
Table of Contents
