How To Use - Remington HC-5200 Use And Care Manual

Before using read the important
safety instruction section in front
of the manual.
Charging your clipper
1. Turn the appliance off.
2. Connect the charging adaptor to
the product and then to the outlet.
■ If the product is not going to be
used for an extended period time
(2 – 3 months), unplug it from the
outlet and store.
Fully recharge your product when
■
you would like to use it again.
3. Allow 16 – 20 hours for a full
charge.
Before starting the cut
■ Inspect the clipper making sure that it is free from hair and dirt.
■ Seat the person so that their head is approximately at your eye level.
■ Before cutting, always comb the hair so it is tangle free and dry.
Comb position
1
2
3
4
5
6
7
Charging
Corded use
Connect the charging adaptor to the
product then to the outlet.
CAUTION: Extended outlet only use
will result in the reduction of the
battery life.
Keep the appliance dry.
Cordless use
When the unit is switched on and
fully charged, the product can be
used in cordless mode for up to 40
minutes.

How to Use

Short comb
3 mm
6 mm
9 mm
12 mm
15 mm
18 mm
21 mm
Long comb
24 mm
27 mm
30 mm
33 mm
36 mm
39 mm
42 mm
21