Cleaning Cautions; Battery Removal; Environmental Protection - Remington HC-5200 Use And Care Manual

Cleaning cautions

Only model HC-5200
■ Only the attachment guide combs
may be removed from the product
for cleaning.
■ Cleaning should be done with a soft
brush, such as the brush supplied
with the product.
■ Do not rinse under water.
The battery must be removed
from the appliance before it is
scrapped.
1. The appliance must be
disconnected from the supply
mains when removing the battery.
2. Ensure that the clipper is
discharged of all power and
disconnected from the mains.
3. Remove the screw cover from back
housing.
4. Using a small screwdriver, remove
(1) screw from the bottom of the
clipper.
5. Pry the front panel from the front
housing and expose the PCB and
batteries.

Battery removal

■ Do not use harsh or corrosive
cleaners on the units or their
blades.
■ Ensure the appliance is switched
off and unplug from the main outlet
before cleaning.
6. Pry the PCB assembly from the
housing.
7. Cut or break the wire stamps on
the both end of the batteries and
remove the batteries.
8. The battery is to be disposed of
safely.

Environmental protection

To avoid environmental and health
problems due to hazardous sub-
stances in electrical and electronic
goods, appliances marked with this
symbol must not be disposed of with
unsorted municipal waste, but recov-
ered, reused or recycled.
25